Woodworking is a craft like no other. You get to work with one of nature’s most useful resources and make something with your mind and hands. Whether you do this personally as a hobby, professionally for money or are just reading about it as a future possibility, this article has tips you can use to be a better woodcrafter.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2″ to 3″, you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Use hot glue instead of clamps for little things. When cutting, filing, sanding, or finishing something small, use the hot glue gun to glue the piece to your pedestal stick. The glue holds holds just like clamps, if not better than clamps. It also works great for things that clamps will not work on. When you finish your project, loosen it gently with a putty knife.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
Trim laminate by using tin snips. The tin snips make it easy to cut the laminate down to whatever type of shape or size that you need. If you buy a pair of snips specifically for laminate cuts, they’ll always be sharp for you.
You will find free wood in all sorts of places, so keep a watch out. Businesses who use pallets may give them to you at no charge, especially if you can collect them. Look online and find ideas for using them.
Never stick with tape measures alone. Story sticks can be helpful, and you are always able to cut later. Using scrap wood for your cuts is preferable because you can try out a fitting first. Planning your cuts in several ways prevents mental boredom.
Make sure you buy the right tool for the job. When you are building a wooden deck onto your house, it would be difficult to do all the cutting with a hand saw. Instead, you should cut with a circular saw. A circular saw is electric; however, a hand saw is not.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
When you need to finish, sand, shape, file or cut a small item, you may wish to glue it to a pedestal stick rather than attempting to clamp it. Clamps can be cumbersome when doing fine work, and sometimes, it is not even possible to use a clamp. A dot of hot glue will hold your small piece in place, and you can simply pop it free using a putty knife when finished.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Choose your woodworking tools and equipment carefully if you live in a small space such as an apartment. You can still enjoy completing woodworking projects, but might have to forgo the 14-inch band saw. Pick tools that will do what you need but don’t take up too much space.
Before beginning any staining project, test the stain in an inconspicuous location. Different types of woods absorb stains differently and can change the color of the stain on the finished project. By doing a test spot first, you can ensure that your finished woodworking piece will look beautiful when stained.
Test your chosen wood stain in an inconspicuous area. Perhaps, the stain did not give you the result that you had expected, or there were unforeseeable problems in its application. By testing it in advance, you can avoid costly mistakes. It will make for much less work for you.
Know the wood that you are working with very well before you begin your next woodworking project. You want to know the direction of the grain, the durability of the wood as well as how it will be affected by weather conditions and the tools that you plan to use. Knowing these things will help to have the results that you desire.
Always consider where your project will end up when done. For example, when building a shed, you need to consider if you need it to be portable or if it will stay in one spot. On top of that, you’ll have to be sure that there is nothing in the way, such as rocks or a fence.
Be careful if you are gluing and staining at the same time. If you apply too much glue to a visible section of the piece you are working with, it can fail to soak into the wood before it dries. Once it is dry, it can cause your stain not to stick properly to the grain.
The craft of woodworking is unlike most others. It is a medium where humans take a strong natural resource and work in ways that leaves anything from pieces of art to buildings. Whatever your personal level of involvement in woodworking is, this article had tips and tricks in it you can surely use.