Most people don’t know much about the hobby of woodworking. They think it’s just a matter of cutting some wood, slapping it together and calling it a success. The fact is that there is more to it than that, and the tips below will guide you through the process.
Before using any new tool, do your research on it in full. New tools can mean serious injuries for those that use them incorrectly. Even if you’re pretty sure of how to use it, don’t risk it. Study up via the web and books related to the tool in question.
Begin small with woodworking projects. It can be very exciting to get yourself ready for your first woodworking project, but don’t let your excitement overtake your smarts. Buy only what you need, no more for right now. Don’t fall for buying tools that you currently don’t need as you may find better alternatives in the future.
Buy some scrap wood and use it to practice on. Scrap wood is really cheap, and it makes for great practice wood. Use it to try new skills that you’re learning. Practice with new tools on it. Make your mistakes here, not when it counts. You’ll be happy you did in terms of budget.
Try dry fitting wood before you glue it. When you try to move things around after applying the glue, you’ll likely end up with a big mess. Dry-fits help you see what components go in what locations.
If there is a joint in your work that does not fit together properly, this cannot be fixed with glue. While it may seem like the simple way to fix things, it will only work temporarily. The best thing to do would be to start over and be more careful the next time.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
To help your paint and stain brushes stay soft and subtle suspend your brushes in paint thinner. One of the best items to do this is those plastic pop-up baby wipe dispensers. The top of the container will securely hold your brush and also helps prevent your paint thinner from evaporating.
Before you paint your wood project, make sure that you have properly sanded the piece. Start with a coarser grade of sand paper, then gradually change to a finer grade. After sanding, wipe your project with a tacky cloth to pick up residual wood dust. After that, your piece will be ready to be painted.
You make mistakes. Always remember that, but never say it. You have made mistakes in the past, you are going to make them in the future. Always treat them as learning opportunities. However, never point them out to others or talk about them. Others may not notice, or even care. They’re likely to just be impressed you did something they couldn’t.
Build the best that you can. What this means is to not get lost in chasing perfectionism or analysis paralysis. Be honest with yourself about how good you are and cater to your strengths. Be proud of what you are able to do with woodworking, and do what you can to learn specific skills that improve on what you already have mastered.
Stay in contact with others. Where you work is your own space and not likely to have internet. There may be times when you get stumped on a project. Talk to other woodworkers to get support, answers to your questions, and more ideas. It’s really hard to find a problem that no one has experienced before.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Quickly get rid of burn marks caused by the router. Certain woods burn easily when routered and it can be very time-consuming trying to sand the marks away. If the router template is complex, it may be nearly impossible. Try just routering down further just a small amount using the same bit. About 1/32nd of an inch should take the burn marks off.
When you start sanding, always use a fresh sheet of sanding paper. Using fresh sandpaper allows you to get the sanding done more quickly. It is also easier to sand with fresh sandpaper. Also, while sanding it is a good idea to check the sandpaper occasionally for clogging so you can change it as needed.
Use tape to catch excess glue. Glue seeping out of joints can stain some wood, but this can be avoided using regular masking tape. First clamp your boards together without the glue, and tape across the join. Using a sharp blade, cut the tape along the join. When you glue the pieces, the excess glue will seep onto the taped edges of the board, where it can be easily peeled off.
As you learn more about woodworking, you’ll find that things become easier. You’ll be able to plan out your projects better, complete them on time and have end results which are impressive. Use this new knowledge to make your hobby the best it has ever been, time and time again.