Today, choosing to do a woodwork project offers lots of opportunities for you that won’t require purchasing elaborate and expensive tools. If you’re a beginner, look into different kits and shortcuts that can help you create a professional-looking project without being a master woodworker. Use the suggestions below to consider some projects that you can undertake without years of woodworking experience.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
When using stains or finishes, be sure to stir them, rather than shake them. Ingredients may have settled onto the bottom as they sat on the shelf. Shaking can cause bubbles that hinder the mixing. Stir until the solution is even so that you get the best results.
You can use tape to catch excess glue. If you want to prevent oozing glue stains along joints, try clamping pieces together without using any glue. You just put tape on your joint, and then cut along it using a sharp blade. Separate your pieces, and then apply glue. After that, clamp them to each other again. Your glue will ooze on the tape instead of the wood. You can peel off the tape before your glue dries.
Even if you have been doing woodworking for some time you may want to consider taking a class. There are different levels of classes available, so you should be able to find one that teaches you something and is challenging. There is never too much that you can know about woodworking.
If you have been doing woodworking for some time now you may want to think about using your skills to make your own furniture. If you already have all that you need you could even do this as a service to those that are less fortunate than you. It is a great way to share your passion with others.
If you have a high skill level when it comes to woodworking you may want to think about taking some time to share your knowledge with others. You can keep it simple by recording what you do step-by-step or you could take it to a higher level and teach a class.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
Always keep your work area clean and safe, even when you are not actually there. Leaving out pieces of lumber with nails in them or even power tools that are easily activated in your yard can be dangerous. You never know when animals or even neighborhood children might come romping through and hurt themselves.
Be certain you have the right protection for your ears. Woodworking equipment can be very noisy. Exposing your ears to these things for a long time can cause hearing loss. You can either purchase a high quality set of headphones or use disposable ear plugs. Make certain that you use some form of protection when operating machinery.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
When buying wood for your woodworking project, always buy long and not to the exact measurements. Some stores will sell you wood that is cut to length. Always measure long and trim down to the exact size you need in your shop. This way if you made a minor error in measurement, you will have a little bit of extra wood to cut off or utilize to make up for the difference.
When planning woodworking projects, choose wood that fits your items. Soft woods should be avoided for table top use as it will scratch very easily. You will also need to remember that different wood varieties take stain differently and will be different colors once finished.
Attached a small magnet to the bottom of your hammer’s handle to hold several nails when working above your head or on a ladder. This simple technique allows you to keep your nails handy and avoid climbing up and down the ladder when you are working above your head.
There are many options for you to express your creativity and skills without being a master woodworker when it comes to projects around your home. Looking around for modern ways to produce woodworking projects to enhance your home might be easier than you think. Use the tips above if you’re considering a woodwork project but you’re worried that you don’t have enough skill to undertake your project.