Whether you are a professional woodworker, or just do it as a hobby, there is always good reason to take time to learn more about the skill. There are always new tricks that are discovered, as well as new tools to hit the market to make your work easier. If you want to learn more you need to read the article that follows.
The reason why many power tools have guards on them is to keep you safe. Never remove the guards off of any of your tools. You may not understand why they are there, but they are there for a reason. They are there to protect you from sharp blades, moving parts and other things that could potentially hurt you.
Use the right wood for your project. Different types of wood handle stress in differing degrees. Practice with wood so you know how it reacts to what you do to it.
When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
Always use the safety equiptment that came with any of your woodworking tools. You may feel that a sheild is getting in your way when you are sawing, but its purpose is to protect you from serious injury. If you feel tempted just think of what it would be like to lose a finger or worse.
Always follow the owner’s manual when using one of your woodworking tools. Not knowing the manual’s recommendations can result in injury or failure of your tool, and you surely do not want either of these to happen to you. If you have not yet read your manuals do so right away!
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.
Be aware of furniture that people are discarding. These pieces will often have useful pieces of wood you can use yourself. Always review your options before deciding. You could use the wood from an old dresser to make something.
Accuracy is the key in good woodworking techniques. Measure carefully, and double check your measurements often. It only take one miscalculation to result in a cutting error, which can end up in a ruined project. Taking the extra time to measure carefully will prevent some of these problems stemming from inaccurate measurements.
Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.
Always wear proper eye protection before using any power tools. Wood chips can fly and stab you in the eye resulting in a trip to the emergency room. To protect yourself wear safety glasses that have side shield to help protect your eyes from flying debris produced from using power tools.
Before beginning any staining project, test the stain in an inconspicuous location. Different types of woods absorb stains differently and can change the color of the stain on the finished project. By doing a test spot first, you can ensure that your finished woodworking piece will look beautiful when stained.
Unless you are using an orbital sander, do not sand across the grain. Sanding with the grain is much more effective. It will also give your finished woodworking project a more professional appearance. Sanding is an important part of your project, and it is a good idea to get it right.
Make sure that your work space is always very brightly lit. It is very dangerous to use machinery in an area that is not optimally lit. If you do not have the fixtures needed you should invest in high quality lamps so that you are not at risk for injury from not being able to see well.
Some power tools are essential to have prior to starting any woodworking project. You should ensure you have a jigsaw, circular saw, small table saw, drill or driver, and a power sander. When it comes to power sanders, it is better that you get an orbital sander; however, any power sander will do the job.
Keep your woodworking techniques simple. It is easy to get overwhelmed with the many available tools. You can also be wooed by new, fancy techniques. You’ll undoubtedly be tempted to get complicated, but avoid that urge. Even if you do try complicated techniques, you’ll probably end up going back to the simple, tried but true methods.
As you read at the beginning of this article, there is always something new to learn about the field of woodworking, no matter how long you have been doing it. Now that you have read the article, you know that is true because you have surely learned something yourself. Now all you need to do is apply the tips so that they become part of your routine.