Woodworking is a craft like no other. You get to work with one of nature’s most useful resources and make something with your mind and hands. Whether you do this personally as a hobby, professionally for money or are just reading about it as a future possibility, this article has tips you can use to be a better woodcrafter.
Make sand blocks that you can reuse. Use your scrap pieces of 3/4″ plywood and cut as many blocks as you need for the sandpaper grits you use the most. They should be 2.5″ x 4.75″. Use some spray adhesive on your blocks and the cork tile. If the cork is too large, trim it with a utility knife. Put glue on the sandpaper and apply to the cork. Use a utility knife to trim the sandpaper around the edge of the block. Label each block.
Opt for gel stains when staining furniture. Liquid stains are prone to running, while gel stains tend to stick. Gel stains will create a more consistent finish on pieces, as well.
Familiarize yourself with the tools that you are going to use. This is a very important tip for the beginner, but even more advanced woodworkers can benefit from it too. Lay out the tools and make sure that you know the workings of each one. If you’ve got a brand new tool to you, spend the time that you need with it.
When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.
When you install your hacksaw blade, make sure the teeth face forward. They are designed to cut when pushed using a forward stroke instead of a pulled stroke. Some of these blades have arrows pointing toward the handles that show the correct way to install them. Install it making sure it is tight and cannot bend. When you do lots of cutting, your blade heats up and expands, so make sure you tighten it before it begins bending.
Sign up for a woodworking or shop class at a local school. You can definitely teach yourself a lot about woodworking, but there’s nothing better than learning from a professional. You’ll pick up important skills much more quickly, and you’ll make a lot of great friends along the way.
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
When wiping excess stain off wood, wipe in the direction of the grain. Otherwise, the stain will just lay on top. Not only does this ensure that the stain is getting all the way into the grain, it will show off the grain of the wood to its best advantage.
Attached a small magnet to the bottom of your hammer’s handle to hold several nails when working above your head or on a ladder. This simple technique allows you to keep your nails handy and avoid climbing up and down the ladder when you are working above your head.
Before beginning your woodworking project, create a space to work. Be it the garage, attic, or extra room, your space needs to have enough space to house your tools and supplies. Keeping all of your woodworking tools and materials in the same place allows you to work with a minimum of interruptions.
Try to keep your work area clean as much as possible. There is going to be a lot of wood dust on the floor. Pieces of wood debris may be strewn about. When you keep your work area clean, you reduce the occurrence of injuries. Always keep a broom, dustpan and a large trash can on hand.
A good woodworker knows his wood. You must familiarize yourself with things, such as the difference between softwood and hardwood. Learn the different kinds of grain, and what types of wood are best for indoor, and outdoor use. It is also wise to know about the cost of different wood types. Cost can affect your decision about which wood you will choose for a project.
Always make sure that your double check any measurements you take. You may wish to triple check if you’re using pricy materials. Measuring can cause big mistakes. Cutting too far or too short can completely ruin that piece of wood.
Some woodworkers look for perfect boards with no knots or blemishes for their projects. Using imperfect boards can add character to the finished piece so long as the defect does not compromise stability. Wood that shows whorls or burls can be used to create beautiful pieces that demand a high price when sold.
Consider cedar for your projects. It is absolutely gorgeous, whether finished or left untouched, and it smells amazing. On top of that, it is easy to work with and provides you with a material which makes your project come to life. Whenever you want to work with wood, cedar is a great choice.
If you are just starting out with woodworking, pick up lots of wood. One great way to be able to practice is by picking up off cuts at your local hardware store. You will either get them free or for a song, and you can play around with them as you learn new techniques.
The craft of woodworking is unlike most others. It is a medium where humans take a strong natural resource and work in ways that leaves anything from pieces of art to buildings. Whatever your personal level of involvement in woodworking is, this article had tips and tricks in it you can surely use.