Plenty of people use the woodworking craft as an excellent tool to create projects. Woodworkers make wonderfully creative items, whether it be a table and chairs or a simple bookshelf. Knowledge is they key to successful woodworking. Read on to gain better insight to boost your woodworking enjoyment.

It is always a good idea to have a pre-stain conditioner for the wood you’re planning to stain. This will reduce the risk of irregularities and blotches in the final product. These applications even out the stain on the wood.

TIP! When you are working with wood, always think about safety. Wear safety equipment and always use tools the correct way.

Make your own sanding blocks. For each sandpaper grit that you usually use, cut six blocks from a scrap of three-quarter inch plywood. They should be 2.5″ x 4.75″. Put spray glue on a cork tile and each block. Stick one block to your cork and be sure to cut your cork flush using a utility knife. Spray the back of a sheet of sandpaper with adhesive and adhere the cork side of the block to it. You can make smaller blocks if you wish as well. These can be used for smaller pieces demanding finer sanding.

Stair gauges can be used for crosscut guides. Clamp them on the carpenter’s square and be sure they match up. Mark each notch. If they’re on the same carpenter square’s tongue, that combination can create the perfect guide for a crosscut using a circular saw.

Did you realize that how high your workbench sits will have an effect on your work? In order to get the right height, measure from your floor to your waist. This is how tall your bench should be.

TIP! Use a pre-stain wood conditioner before applying a stain. These conditioners will make the finished project look better.

Dry fittings prior to glue application are always a good idea. Attempting to fix a problem after you’ve applied glue is a recipe for damage and disaster. Dry fitting helps you figure out where each piece is placed.

A small metal ruler is handy to carry around in your pocket for quick measuring. It has a tendency to fall out of your pockets, though. Make the small ruler a metal one, and put it inside the pocket in which you have a small magnet for picking up those loose screws. The magnet will keep both objects securely in place.

Before using wood, make sure you have a good grasp of all the different types of woods that are out there. Each type of wood is completely different. Staining looks different on various types of wood. Different cuts of wood will also splinter differently. You will also see different types of grains. Each of these things should be considered before starting your next woodworking project.

TIP! Test the stain before you apply it to the wood you are using in your project. This lets you stay away from any sudden surprises when the stain color is not what you expected.

A simple piece of wood can hold so many possibilities but not everyone can see them. If you can, this article is for you. Working with wood is a very enjoyable process, and you should read on to learn more.