Woodworking is a skill that has been valued since the beginning of time. Many woodworkers enjoy it from an artistic point of view while others enjoy creating larger, more functional items. But whatever it is that you enjoy about woodworking, here are some tips to help you enjoy it even more.
Reusable sanding blocks save you time and money. To make them all you need is a few pieces of scrap lumber. Cut a piece of 2×4 into a rectangle approximately 2 inches wide and 4 inches long. Cut a piece of sandpaper the size of your block. Then, spray one side of the piece of lumber with spray adhesive and adhere the sandpaper to the block of wood.
In a pinch, you can use a hacksaw blade as a makeshift compass. Often you can’t find a compass when you need it in room, when you are away from your shop. You can quickly nail a hole in the middle of a hacksaw blade, then steady the pencil against the proper tooth to get the right length. Draw that circle.
Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.
It is essential for you to have sharpened tools if you plan on working with wood. Dull tools can be dangerous since they are more prone to slippage. If you have no idea how to hone and sharpen your tools, you will need to learn how since there won’t always be someone around to do it for you.
Test the color of a stain before doing the complete stain on more visible areas. Wood is never predictable, so a stain may not look the way you expect or need it to when applied to the wood you are using. When you test the stain in a spot that’s not easily visible, you prevent having a project turn out badly.
Sometimes a little bit of glue is better than a clamp. Every woodworking shop should have a hot glue gun. Hot glue will hold small pieces better than any clamp ever could, if you could even maneuver one in place. When you are done, just gently pry loose with a putty knife.
If you find that there is rust on any of your woodworking tools there is a rather easy solution. As long as the rust is just on surface, all you need to do is use a pumice stone on the spot. Be sure to scrub gently, as being too rough can lead to you damaging the tool itself.
Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.
Make sure you buy the right tool for the job. When you are building a wooden deck onto your house, it would be difficult to do all the cutting with a hand saw. Instead, you should cut with a circular saw. A circular saw is electric; however, a hand saw is not.
Learn the basics of sharpening whatever woodworking tools you use personally. Start any work session with cleaning and preventative maintenance. The few moments you put into honing your tools each day will spare you tenfold that time in sanding and repairs. You are also ensuring your personal safety here as well.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
Clean tools last longer; therefore, it is important to clean your tools after each use. Dip a shop rag into a small amount of acetone and wipe each tool to remove any build-up. Afterwards, dip a different shop rag into machine oil and wipe the metal of each tool to help prevent rusting.
There are some essential hand tools that you should get before beginning your initial woodworking project. A hammer is obviously a must-have item. The best type of hammer for woodworking is a claw hammer. Choose the one that feels good in your hand. Don’t pick one which is very heavy.
If you use an orbital sander to smooth the surface of your project before finishing, move the sander very slowly. The recommended speed is one inch per second which is slower than most people sand. Going too fast can cause a small spiral pattern that does not show up until the finish is applied.
Make sure that your work space is always very brightly lit. It is very dangerous to use machinery in an area that is not optimally lit. If you do not have the fixtures needed you should invest in high quality lamps so that you are not at risk for injury from not being able to see well.
When driving larger nails into panels like a two by four, do you often inadvertently split the wood. You can often avoid this annoyance by using a simple trick. Turn the nail over and give the sharp end a quick rap with the hammer, dulling the tip a bit. The nail is then less likely to split the wood.
As you already know, woodworking can be a very useful and creative hobby. There is a lot of creativity and enjoyment that goes into creating items of wood. Hopefully the tips from above will enhance your woodworking efforts and inspire you to make even more works of art to enjoy.