Simple Tips And Tricks About Working With Wood

by | Dec 26, 2021 | Carpentry and Woodworking Projects

What types of information are needed to start woodworking? Is it more than gluing wood together? There is lot more involved that just that! Indeed, the greater your knowledge, the more fun it will be, so keep reading.

Test your stains on scraps of wood or inconspicuous areas of the piece you’re using. This will give you an idea of what it will look like on the finished project. You never know how wood will behave, so do the test first.

TIP! When doing any woodworking project, safety is a big concern. Always use your tools in the way they were intended to be used and wear safety equipment at all times.

Try using a stair gauge as a crosscut guide. Just clamp them on your carpenter’s square while making sure they match up. Then you should mark all of the notches. Putting them on the carpenter’s square tongue makes for a great guide for a circular saw.

Gel Stain

Gel stains are the new big thing for staining furniture and other wood projects that need staining. Liquid tends to run after it’s put on, whereas a gel stain sticks to the wood much better. Furthermore, since a gel stain is thicker it tends to remain constant through the application process, which lets it be more even on the furniture.

TIP! Condition your wood with a pre-stain product. You won’t have any blotches or unevenness when you use a conditioner.

Prior to applying glue, attempt a dry fitting. When you try to move things around after applying the glue, you’ll likely end up with a big mess. Dry fitting helps you figure out where each piece is placed.

Every shop that does woodworking needs to contain a stair gauge. Typically, they are used for the layout of stair jacks, but they can also be used to clamp down the carpenter’s square. That makes the carpenter square a guide for the circular saw. If you use the square as a guide, your cuts will be straight every time.

Many people have a small ruler on them when working in the shop. Sometimes it will fall out of your pocket when you move around. Get a metal ruler instead, as well as a small telescoping magnet for picking up loose screws. Keep them both in the same exact pocket. The magnet will keep the ruler in place.

TIP! The height of the work bench you use affects the quality of your finished product. To find the best height, measure the distance from the floor to your waistline.

Hopefully, this article has opened your eyes to the extensive scope of woodworking. Do you want to start enjoying it today? From giving you a hobby to becoming a full-time job, with this great knowledge behind you, the sky is truly the limit when it comes to your future.