Woodworking is so much fun! While this is true, it’s such a vast field that you might not know where to begin. Don’t get overwhelmed, take it one thing at a time. This article can improve your skills as a woodworker.
Always make safety first with a woodworking project. Make sure that you always use tools properly and wear the proper safety equipment. Do not alter your tools by removing the safety features. They are in place for a reason. You don’t want to go to the hospital because you did something stupid.
Use a pre-stain wood conditioner before staining the wood. This will reduce any blotches in the piece that you create. The conditioner will let the stain apply evenly and smooth out the wood.
You can make your own reusable sanding blocks. Start by cutting a few blocks from a scrap piece of plywood for all the sandpaper grits you need to use. You want them to measure about two and half inches by four and a half. Apply spray adhesive to each of the tile squares and the blocks themselves. Place one block onto the cork and make sure the cork is cut flush with a sharp knife. This piece should then fit you hand fairly well and be secure enough to not slip. Fnally, make sure you cut sandpaper flush with the cork, and label every block.
Stair gauges are very important devices for you to use. Make sure that they are clamped next to the carpenter’s square when you cut. Then you should mark all of the notches. When you combine them on your carpenter’s square’s tongue, they’ll guide your crosscuts for you.
Workbench Height
Are you aware that your workbench height is critical to your work quality? If you wish to determine your ideal workbench height, measure how far it is from the floor to the middle of your waist. This technique will ensure your workbench is at the optimum height.
Gel stains are something that you can get a lot of use out of when you’re staining items that are going to be used for furniture. Liquid stains tend to run when they are applied, while gel stains stick to the lumber better. Gel stains will create a more consistent finish on pieces, as well.
With all that you’ve read here, you are closer than ever to being a good woodworker! Keep learning what goes into this kind of craft so that you’re able to be excited when you work on woodworking projects. Explore the creative possibilities before you.
