Woodworking is one of the oldest artisan crafts available to people in modern-day society. However, the slow, time-consuming craft often can feel out of place in the hustle and bustle of today’s business market–despite the high demand for beautiful, skillfully created pieces. With some time and consideration, you can make a place for your woodworking business, even in the sea of modern technologies.
When learning a new woodworking technique, practice it over and over again. Repetition is the best way to learn these skills. So find some cheap wood (scrap wood works), and go at it for some time to hone your skills. This will make it so you’re less likely to make mistakes during important projects.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
Use tin snips to trim laminate for your projects. Tin snips let you cut laminate into usable sections easily. Purchasing a pair of tin snips that will only be used for cutting laminate will keep them sharp.
Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.
Did you know that the teeth on a hacksaw face forward? Many people do not know this. It is the opposite of a wood saw. These saws are supposed to cut when pushed forward. Many times the blades are not labeled for correct installation. If this is the case, remember to put the teeth facing forward.
Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards and time spent hunting down a misplaced item to a minimum. Keeping screws, nails and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.
You make mistakes. Always remember that, but never say it. You have made mistakes in the past, you are going to make them in the future. Always treat them as learning opportunities. However, never point them out to others or talk about them. Others may not notice, or even care. They’re likely to just be impressed you did something they couldn’t.
There are some basic tools needed for woodworking projects. These include a saw, hammer, files, level, square and measuring tapes. Larger pieces of equipment you may need are different types of electrical powered saws and sanders. The power tools can be quite expensive, and you may not need them unless you do a lot of woodworking projects.
Keep your eyes peeled for furniture others are putting in the trash. These pieces will often have useful pieces of wood you can use yourself. Always review your options before deciding. Perhaps the drawers of an otherwise unusable dresser can be used to create a unique bookshelf.
Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Of the surface of the wood in your project has been dinged or dented by accident, you need to remove the blemish before you finish it. If the fibers of the wood are only crushed, not torn, you can use steam to fix the problem. Fill the depression with a drop or two of water and use a hot iron over a damp cloth to level the dent.
Develop good safety habits when beginning your woodworking hobby. It is easy to disregard safety, thinking that it doesn’t really matter if you wear safety glasses, for example. You’ll change your mind the first time you sustain an injury while doing something you enjoy. So start right – think safety!
When opting for a pencil, try using a mechanical pencil instead of other varieties. Mechanical pencils allow you to make more precise lines on your wood. This means more precise cutting and less mistakes down the road. Even choose mechanical pencils over pencils that are labeled carpenter’s pencils. They are still more precise.
A good woodworker knows his wood. You must familiarize yourself with things, such as the difference between softwood and hardwood. Learn the different kinds of grain, and what types of wood are best for indoor, and outdoor use. It is also wise to know about the cost of different wood types. Cost can affect your decision about which wood you will choose for a project.
Make sure that your work space is always very brightly lit. It is very dangerous to use machinery in an area that is not optimally lit. If you do not have the fixtures needed you should invest in high quality lamps so that you are not at risk for injury from not being able to see well.
Although many naysayers will tell you woodworking is a dying craft, there is no statement further from the truth. Every day, people require woodworking for construction, home improvement projects, art, and countless other uses. By taking into consideration the demand for your product and utilizing your skills effectively and efficiently, you can ensure the success of your woodworking business.