Woodworking is a very rewarding activity. Who would not want to build something from scratch? The fact that you get to do it using mostly your imagination and hands is what makes woodworking so very appealing. Keep on reading for some expert woodworking facts and tips you need to know.
Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.
Create sanding blocks you can reuse. For each sandpaper grit that you usually use, cut six blocks from a scrap of three-quarter inch plywood. Cut them to 2.5″ by 4.75″. Use spray adhesive on both the cork tile square and your blocks. Put one piece of cork on each block and line it up flush. You can then spray adhesive on some sandpaper and place it on the corks. Trim your sandpaper so that it is even with the corks and label each block appropriately.
Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.
Do not make the mistake of buying woodworking supplies based on the price alone. This can turn out to be a mistake that will cost you more in the end. If the supplies you buy are not very good quality, they will wear out sooner than more expensive tools, which means you will have to replace them much sooner.
When working with wood, it is important that you have a lot of patience when it comes to the finishing process. This is just as important as the actual woodworking. Things like gluing edges and sanding the wood down take time, and you will only mess things up if you try to rush through this process.
When you need accurate measurements in the 3-foot range, use a drafting square. These are relatively cheap and can be found at any art supply store. They are perfectly straight and extremely accurate. They are less cumbersome than a framing square and are also longer. This will become your go-to tool in your woodworking shop.
Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.
Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards and time spent hunting down a misplaced item to a minimum. Keeping screws, nails and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.
You should have good lighting in your work area. You have to be accurate in measuring when you work with wood. You are going to be using tools that are sharp enough to cut through your hand. These things require that your space be adequately lit for safety.
Drinking some beer while woodworking may seem like fun. It’s not the best idea, though, to add alcohol to sharp tools. Never drink any alcohol while you are working a project. This is also true for prescription medications or illicit drugs.
Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.
Accuracy is the key in good woodworking techniques. Measure carefully, and double check your measurements often. It only take one miscalculation to result in a cutting error, which can end up in a ruined project. Taking the extra time to measure carefully will prevent some of these problems stemming from inaccurate measurements.
When you are getting ready to glue wood together, get some packing tape ready to help you secure the wood. Packing tape is a great way to tighten up those joints so that the glue sets as perfectly as possible. Pre-cut the packing tape so that you have it handy the minute you need it.
Make sure that your work area is always clean and organized. It is easiest to work when you know where everything and you do not have to work around a mess. To keep your area nice at all times you should put things away as you work and discard waste as it is produced.
Consider every part of your project, including the small, empty spaces. For example, what can you add to the underside of your new desk to add more storage space? If you’re building a bed, can you add some drawers underneath to put the linens into? Always keep your mind open to new ideas.
If you plan to make indentations which aren’t deep, consider using a raised-letter bit. Straight bits will rip up the grain of the wood when trying to create a circular cavity, plus it leads to lots of sanding when you’re done. The raised-letter bit is intended for this type of work, leaving a clean surface once done.
In conclusion, woodworking is an entertaining and rewarding hobby. It is one that keeps your hands from being idle while allowing your imagination to soar. Now that you have heard from the experts, you should be more comfortable with this craft. Use this insider information to perfect your skills as you build whatever your heart desires.