Whether you are a novice woodworker or a seasoned professional, you probably understand that knowledge is the key to working with wood. Woodworking still requires an ample amount of skill as well; however, without information and learning, those skills may not do you an good. This article hopes to pass on some great suggestions to help you enjoy woodworking.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
If you plan to use stain, test it on a small scrap of wood first. By doing this, you can prevent unwanted surprises in the event that the stain color turns out differently than you expected. Because wood tends to be fickle, mistakes can be avoided by testing it out beforehand.
Never use your own fingers as guidance when cutting narrow chunks of wood. Use a strip of wood instead to maximize safety. This will assure you keep your fingers.
Use some affordable filters for collecting fine dust. The filters and micro-filtering bags made to catch this dust can get pricy after several replacements. Try using the ones that are sold for use in household vacuums.
You can buy the cheap ones and easily modify them to fit your shop vacuum. Cut off the top a bit past the small opening. Turn the whole thing inside out so that airflow still flows in the usual direction. Slip it over your foam filter using the retaining ring to keep it in place.
Ear protection is vital when you begin a project. The machinery used in woodworking is noisy. Extended exposure to such noise can cause hearing loss. You can buy disposable plugs for your ears, or get a good pair of headphones. Make sure you wear them when working with woodworking tools.
When applying stain, work in a well-lit and well-ventilated area. When you make sure your project is under the strongest light in your work area, you more easily spot drips, runs and any spots you missed. Ventilation is also important to protect your health, and even on small projects, strong fumes can affect you by making you feel sick or giving you a headache.
If you plan on applying any gloss or stain to a piece of wood, it is very important that you sand it down first. Failing to do this step will result in a wood surface that is not very smooth. Use sandpaper to smooth things down then make sure all dust s removed by brushing it with a cloth.
Try not to spend too much time using tape measures. Practicing on story sticks is effective and gives you confidence to work your way to that final cut on your project piece. You may want to first cut on scrap wood to see how everything fits. Planning out your cuts in different ways keeps your mind working.
Recycle wood when you can. You can also look for good wood to reuse from establishments that have a lot of scraps, like construction or flooring companies. You not just saving a lot of trees when you use recycled wood in your projects. You are also saving some cash.
Do you know that different colored tin snips make different kinds of cuts? Tin snips with red handles are used for making left hand turns. Green handled tin snips are used for making right hand turns. Finally, yellow handled tin snips are used for straight lines and gradual curves.
When sanding, just use light pressure. If you apply too much pressure, you can easily find that you’re left with a wood surface that is very uneven. If you have the right grit, you don’t need to put on too much force. Just gently sand in a circular motion.
When staining a completed woodworking project stir your stain often, especially if you are using a liquid stain. As stain sits, the sealer separates from the stain and settles to the bottom. If you do not stir the stain often, your piece may have different shades of stain because of this separation.
Avoid sanding with your fingertips. Instead, use a sanding block. If you can also use an electric sander. Better still, use an orbital sander. Sanding with your fingertips can cause sanding ruts. You may not notice these ruts until the project is finished. These are difficult or impossible to repair.
Keep your patience levels high. Some people get mad when their project doesn’t come together like they plan. Remember that your result is waiting there inside of the wood, you just have to bring it out. Go slow in the beginning, and soon you will see your patience paying off. In no time, your work will be complete.
Keep a folder of anything that inspires you. If you see a staircase in a magazine or a bedframe in a catalog, clip them and keep them in a folder for future projects. That way, when you want to start a new project, you’ll have a folder chock full of great ideas.
When driving larger nails into panels like a two by four, do you often inadvertently split the wood. You can often avoid this annoyance by using a simple trick. Turn the nail over and give the sharp end a quick rap with the hammer, dulling the tip a bit. The nail is then less likely to split the wood.
Try to learn as much you can about the new technologies available to you for your woodworking needs. Because of advances in precision tools in recent years you can likely find the things that you need so that you can do a perfect job every time that you tackle a woodworking project.
It is hard to imagine a world without woodworking. Those that can shape simple wood into imaginative or useful pieces are often sought after. If you hope to be successful with woodworking, or just boost your knowledge, it is hoped that this article has given you proper insight into enjoying working with wood.