At some point down the line, you’ll need woodworking skills. While you might not earn your living with it, you may decide you’d like to build a deck or do some crafts. Keep reading for some vital tips to know about this field of expertise.
Be safe when you first start out in woodworking. Wear the proper safety clothing, including goggles. You may feel silly, but you are dealing with sharp tools and splintering wood. These are things that can cause significant injuries to even the most seasoned woodworker. So be safe, and make sure all that are around you are safe too.
Put some more spring in your grip. Sometimes you might need a spring clamp, however you only have one hand available to use. It is sometimes hard to get these things open when you’re only using a single hand. Thankfully, there is a tip which can help. Before you begin a glue-up, place all the clamps that you need on a random scrap of wood using both free hands. This will have them easy to reach and ready to go so you can use them with one hand.
Do you lose drill press key chucks often? A good way to keep them within reach is to drill a hole somewhere on the drill press they fit. On top of the press is a good place, where you can see it. Drill a small hole the exact same size of the chuck’s crossbar and it will fit in perfectly.
If you’re looking for that first woodworking project, how about starting with a simple box? In fact, that’s probably the most popular first woodworking project out there. Buy some cheap wood that you like, and design a box that could work around your home. Maybe it’s for writing utensils, or perhaps it’s for the kitchen? There are a lot of options.
Woodworking can be expensive. It is a good idea to go over your plans before you start and make sure that the project fits within your budget. Price out all materials by making a list of the required supplies and then go to the local hardware store to figure out the total cost.
Learn from woodworking experts. In fact, you could even search out a mentor that you can shadow to learn best woodworking practices. Seeing these skills in motion are some of the best ways to pick up and really own different woodworking techniques. And you may even make a long term friend in the process.
The most important part of any woodworking project is safety. There are many sharp tools that need to be used and you should be very careful when using them. Find out the proper way to use these tools. If they are power tools, read the manual. If they are hand tools, have a professional show you how to use them properly.
Stain only provides color to wood, not finish. You will need to apply a finish coat on top of the stained wood. If you are in a hurry, or short on time, you can use a product that combines both stain and finish together. Be sure to use a higher-quality brush for this, and stain in the direction of the grain.
You can make a customized color of stain, but make sure the stains you are using are from the same manufacturer. Be sure that you use either all water-based stain, or all oil-based. Never mix the two. Finally, be certain to write down the exact amounts you used of each, so that the color can be duplicated if desired.
Choose the right gloves for every woodworking job. If you need fine motor skills, you should use more modern, high tech gloves of a thin, fine, strong, flexible material. When doing more coarse woodworking jobs in cold, damp weather, use pigskin gloves that insulate well and deflect moisture from your skin.
When you are getting ready to glue wood together, get some packing tape ready to help you secure the wood. Packing tape is a great way to tighten up those joints so that the glue sets as perfectly as possible. Pre-cut the packing tape so that you have it handy the minute you need it.
Avoid sanding with your fingertips. Instead, use a sanding block. If you can also use an electric sander. Better still, use an orbital sander. Sanding with your fingertips can cause sanding ruts. You may not notice these ruts until the project is finished. These are difficult or impossible to repair.
If you are new to woodworking, start small. Although you may be tempted to dive in to a difficult project, it is best to start small and slowly build your skills. Consider building a birdhouse or a shelf to help you learn your way around your woodworking shop and tools.
If you don’t have the money for a good table saw, buy a quality circular saw. You can accomplish most of the same tasks. Buy a good quality blade. A circular saw is ideal for cutting larger pieces. You will likely find you still use the circular saw often even after you move up to a table saw.
Know the wood that you are working with very well before you begin your next woodworking project. You want to know the direction of the grain, the durability of the wood as well as how it will be affected by weather conditions and the tools that you plan to use. Knowing these things will help to have the results that you desire.
Keep your work area organized. Having a specific place for everything will make it easier to find the tool that you need to use. This prevents tools from ending up on your floor where you can step on and injure yourself. Use a caddy for small hand tools to keep them together.
Now you know a little more about woodworking. This definitely helps because most everyone works with wood at some point during their life. Consider your knowledge level now that you have this new information, and the new project possibilities you have opened up.