People respect those who can work with wood. There are many techniques to learn when it comes to woodworking. Below are helpful tips to improve your abilities and take woodworking a step further.
If you plan on staining your project, try using pre-stain conditioner on your wooden surfaces. Pre-stain conditioner can help lessen how noticeable blotches and irregularities are when the project is done. These conditioners are going to help smooth out the wood so that the stain can get into it more evenly.
Create sanding blocks you can reuse. Cut six 3/4″ pieces of plywood for each sandpaper grit. Be certain they measure 2.5 inches across by 4.75 inches long. Spray your adhesive on the cork tile and the block of wood. Put one piece of cork on each block and line it up flush. Get a sandpaper sheet, spray it with adhesive, and then apply it to each of your cork blocks; they need to be face down. Trim your sandpaper so that it is even with the corks and label each block appropriately.
Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.
Take your time when using an electrical saw to cut your wood. If you are doing a woodworking project and try to do it quickly you are risking injury as well as are more likely to make a mistake. Be sure to not even try to start something if you do not have plenty of time.
Always wear safety glasses when you are doing anything that involves woodworking. If you do not take the time to put the glasses on you are taking a huge risk that is not sensible. Just think, if you lose your eye sight you will not be able to do woodworking every again.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Ask local hardware stores if they sponsor woodworking classes. You may be surprised by what you find! In fact, your local Home Depot or Lowes might have classes available monthly that’ll help you hone your skills. This is a quick way to grow as a woodworker with very little out of pocket costs.
Stumped on a good woodworking project? Take a walk around your home. There are always things around your home that need fixing. Or you may see an area that could use something new that can be created with your skills. Let your house become the inspiration for what you really need.
Before you paint your wood project, make sure that you have properly sanded the piece. Start with a coarser grade of sand paper, then gradually change to a finer grade. After sanding, wipe your project with a tacky cloth to pick up residual wood dust. After that, your piece will be ready to be painted.
If you do woodworking at home, create a well-lit, organized area in your home or garage to serve as your workshop or hobby area. Keeping your tools and supplies in one place and well-organized keeps you safer, more productive and enjoying the time spent working on your projects. This is important whether you have a large or small workshop, so set up the space with both lighting and organization at the top of your workshop to-do list.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Don’t push too hard when you sand. Pressure can cause you to get uneven results, or might gauge the surface. If using the properly gritted sandpaper, you won’t need to apply so much force. Just gently sand in a circular motion.
When staining a completed woodworking project stir your stain often, especially if you are using a liquid stain. As stain sits, the sealer separates from the stain and settles to the bottom. If you do not stir the stain often, your piece may have different shades of stain because of this separation.
It goes without saying, you should always be sober when pursuing a woodworking project. Even one beer or glass of wine can interfere with your reaction time and your ability to make sound decisions. If you are using any medication, prescription or over the counter, be sure to heed safety instructions regarding the operation of power tools and machinery.
Use tape to catch excess glue. Glue seeping out of joints can stain some wood, but this can be avoided using regular masking tape. First clamp your boards together without the glue, and tape across the join. Using a sharp blade, cut the tape along the join. When you glue the pieces, the excess glue will seep onto the taped edges of the board, where it can be easily peeled off.
Be certain that your woodworking power tools are in tip top shape before you begin working. Your saw blades and drill bits should be perfectly sharp and installed properly. If you try to use a saw blade or drill bit that is dull or slightly askew, you are sure to run into problems that could be quite dangerous. Additionally, using less than optimal equipment can only detract from the efficiency and accuracy of your work.
It is easy to see why woodworking is a timeless pastime for so many. There will always be some kind of a project out there for a gifted woodworking professional to work on. Whether you’re a hobbyist or a serious woodworker, the tips above will help you get more out of it.