Everyone loves to do certain activities in their spare time. Woodworking is such an enjoyable hobby to engage in that even those who do it for a living will also take it on as a pastime. That said, anyone who loves to work with wood will benefit from reading the tips below.
Whenever you work with wood, wear a pair of safety glasses and a dust mask to keep yourself safe. When cutting or even hammering into wood, pieces can fly up into your eyes or be breathed in. This can lead to health issues which can end your enjoyment of this pursuit for good.
When learning a new woodworking technique, practice it over and over again. Repetition is the best way to learn these skills. So find some cheap wood (scrap wood works), and go at it for some time to hone your skills. This will make it so you’re less likely to make mistakes during important projects.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Add some springiness to your grip. There may be times that your project requires a spring clamp when you only have one hand available to open it. It’s hard to open those kinds of clamps with one hand. There is an easier way. Prior to starting glue-ups, gather your clamps and place them on one piece of wood with both hands. This makes opening them with one hand unnecessary.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
Always keep your work area clean and safe, even when you are not actually there. Leaving out pieces of lumber with nails in them or even power tools that are easily activated in your yard can be dangerous. You never know when animals or even neighborhood children might come romping through and hurt themselves.
Join a woodworking club if you have the time to do so. This can lead to you learning a great deal more about woodworking, and an added benefit is that you will make friends that enjoy the same passion as you. Additionally, it can be rewarding to share your knowledge with others that are just getting started.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Make use one of the beveled inner part of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill on a slow speed.
When deciding on a woodworking project, make sure you know what tools will be required to finish the project. If you are missing a tool, you may have to stop in the middle of the project and never finish. Many tools are available for rent at home improvement stores, but some you may have to purchase. This purchase could bring you well above your budget.
For a beginner, sometimes it is best to buy kits instead of cutting the entire project yourself. You should be able to finish your project quicker with a precut kit. These kits will help you gain some valuable insight on the steps involved in a project so that the next time you can do it all yourself.
Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.
Choose your woodworking tools and equipment carefully if you live in a small space such as an apartment. You can still enjoy completing woodworking projects, but might have to forgo the 14-inch band saw. Pick tools that will do what you need but don’t take up too much space.
When you start sanding, always use a fresh sheet of sanding paper. Using fresh sandpaper allows you to get the sanding done more quickly. It is also easier to sand with fresh sandpaper. Also, while sanding it is a good idea to check the sandpaper occasionally for clogging so you can change it as needed.
Ask for feedback along the way when you’re making something for other people. If you are creating a jewelry box, for example, make sure that you get a feel for how people are reacting to it before you’re done. That way, the other person is happy and you can be proud of your work.
These tips have provided you with a great deal of knowledge you likely haven’t heard about before. Thanks to reading this article, you now have some ideas which will help you better your work. The results will be astounding and you will be so please with how much your skills progress.