Most people don’t know much about the hobby of woodworking. They think it’s just a matter of cutting some wood, slapping it together and calling it a success. The fact is that there is more to it than that, and the tips below will guide you through the process.
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
When you are working on a project, be sure to face your light directly on your working area. The bright light will enable you to detect any drips or runs you may not see otherwise. Missed areas will also be more visible. Be sure to always work in a well-ventilated area as well.
Always put your safety first when it comes to using tools, stains and paints. The more variety you use, the more specifics there are about applications, tool use, times for drying, and more. Put your safety first by reading the instructions, wearing any necessary protective gear, and working in areas with good ventilation whenever using oil-based products or anything that produces air pollutants.
Make sure your work area is safe, well-lit and organized. Working with woods is difficult work, and it is dangerous work when your work area is dim and there are safety hazards in the area. Make sure there are no spills, tripping hazards and other safety hazards that are a disaster waiting to happen.
Whenever you start a new project, consider involving a wood you haven’t used before. It can create an entirely different look and feel for the item, plus it gives you experience with something new. Research how to work with the new wood so you can understand how it functions.
Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.
There are some basic tools needed for woodworking projects. These include a saw, hammer, files, level, square and measuring tapes. Larger pieces of equipment you may need are different types of electrical powered saws and sanders. The power tools can be quite expensive, and you may not need them unless you do a lot of woodworking projects.
If you know people that are selling their home, take advantage of the opportunity. Getting better at woodworking can help you to make some money when you help them, and in return they may be able to sell their home for more. From creating new cabinets to building a shed, your value is great.
You can prevent glue stains by placing masking tape along the joints of wood being adhered. First, tape the wood together along the joint, then use an Exacto knife to cut through the tape at the joint line. Following this, glue the pieces of wood together and clamp them. Just before the glue has dried completely, you can peel the tape off.
Always wear the proper safety gear when you are working with wood. This includes eye protection, gloves and ear plugs whenever you are cutting wood with an electric saw. You should also wear a dust mask to avoid inhaling little pieces of wood. Keep this gear handy so you always remember to use it.
Always measure twice and cut once when working with wood. Most woodworkers have heard this; however, most do not follow this advice. Simply double checking to ensure that your measurements are correct can save you both time and money. Additionally, ensure that you have an accurate tape measure for best results.
Consider a woodworking class at your local community college. The skills and experience you pick up can go a long way towards getting started. Even if you already are a woodworker, you’ll meet others who have an interest in the field. These are future friends or possibly even potential professional relationships waiting for you to explore.
Make sure there are no spots of glue on the wood before proceeding to finish your project. The spots will show up as lighter spots after the finish has been applied. You can use mineral spirits of naptha to completely remove all traces of glue from the wood. You may also be able to remove the glue by sanding the wood.
If you use an orbital sander to smooth the surface of your project before finishing, move the sander very slowly. The recommended speed is one inch per second which is slower than most people sand. Going too fast can cause a small spiral pattern that does not show up until the finish is applied.
Make sure that your work area is always clean and organized. It is easiest to work when you know where everything and you do not have to work around a mess. To keep your area nice at all times you should put things away as you work and discard waste as it is produced.
Ask for feedback along the way when you’re making something for other people. If you are creating a jewelry box, for example, make sure that you get a feel for how people are reacting to it before you’re done. That way, the other person is happy and you can be proud of your work.
As you learn more about woodworking, you’ll find that things become easier. You’ll be able to plan out your projects better, complete them on time and have end results which are impressive. Use this new knowledge to make your hobby the best it has ever been, time and time again.