Woodworking is an awesome hobby that leaves you open to so many different options that it could never get old. If you find that you are in a rut when it comes to the skills that you have you should read the article below. It is full of ideas that can bring new elements into the work that you do.
Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.
Prepare your finishes and stains by stirring them instead of shaking them. You need to do this to remix whatever may have separated. Shaking can cause bubbling and prevent it from mixing well. Stir until everything is dispersed smoothly and evenly.
Familiarize yourself with the tools that you are going to use. This is a very important tip for the beginner, but even more advanced woodworkers can benefit from it too. Lay out the tools and make sure that you know the workings of each one. If you’ve got a brand new tool to you, spend the time that you need with it.
Check out the selection of videos available on YouTube if you would like to learn more about the hobby of woodworking. There are so many videos available from people of all skill levels that you will never be able to watch them all. You can even search for specific skills that you would like to learn.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Get a handle on how a wood takes to staining prior to choosing a wood for a project. Lower quality wood will be called paint grade. Stain grade will be of higher quality and have a nicer finish. Also know that veneer and particle board are really quite different. Veneer tends to absorb too little stain, while particle board too much. Using the appropriate wood means your project has a better chance of turning into what you want.
If you are going to be doing a big woodworking project on the outside of your home, check to make sure it is within the rules. Your local government may have zoning regulations or even a permit process needed for structures like garages, decks and even storage sheds. Also check with your neighborhood association if there is one.
Always keep your work area clean and safe, even when you are not actually there. Leaving out pieces of lumber with nails in them or even power tools that are easily activated in your yard can be dangerous. You never know when animals or even neighborhood children might come romping through and hurt themselves.
You make mistakes. Always remember that, but never say it. You have made mistakes in the past, you are going to make them in the future. Always treat them as learning opportunities. However, never point them out to others or talk about them. Others may not notice, or even care. They’re likely to just be impressed you did something they couldn’t.
You can make a customized color of stain, but make sure the stains you are using are from the same manufacturer. Be sure that you use either all water-based stain, or all oil-based. Never mix the two. Finally, be certain to write down the exact amounts you used of each, so that the color can be duplicated if desired.
Always wear proper eye protection before using any power tools. Wood chips can fly and stab you in the eye resulting in a trip to the emergency room. To protect yourself wear safety glasses that have side shield to help protect your eyes from flying debris produced from using power tools.
It is possible to put a water-based finish on top of an oil-based stain. However, you must wait a full twenty-four hours for the mineral spirits to fully evaporate from the oil-based stain. If the weather is wet or cold, it is better to wait another twenty-four hours before applying the finish.
Make sure that your work area is always clean and organized. It is easiest to work when you know where everything and you do not have to work around a mess. To keep your area nice at all times you should put things away as you work and discard waste as it is produced.
Watch other woodworkers for tips. You might find that, after watching someone work on wood, that they do things a little differently than you do them. In fact, noticing differences might just help you to be a more effective woodworker yourself. Make sure you get permission first, though; you don’t want them to think you are staring too much!
Use hot glue instead of a clamp on small projects. If you have to cut, shape, or file a small object, try using a hot glue gun to attach it to a pedestal. It will hold better than a clamp, and can be used on projects that are too oddly shaped or small to be clamped in the first place. To remove it, simply pry lightly with a putty knife.
Look online for free woodworking plans. Whether you want to build a bookcase, chicken coop, or garden shed, you can find free woodworking plans on the internet. Make sure you check the plans for completeness. Also, you’ll want to evaluate the plans to see if there are any changes you want to make.
Now that you have read the article above you surely have realized that you have so much more available to work with than you thought before. The key to keeping your hobby interesting is to continue to learn about your options, just as you have by reading the above article. Now get out there are put the above tips to work.