Many people have hobbies which they truly enjoy. Whether they like to play competitive sports or video games, nothing compares to those who enjoy the activity of woodworking. In fact, just by utilizing the tips below, you can start to benefit from all the rewards this hobby will bring to your life.
If you plan to use stain, test it on a small scrap of wood first. If you test the stain color first, you will not have any unpleasant surprises. Wood is pretty unpredictable, so doing this small test can help you avoid any errors.
When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.
Sign up for a woodworking or shop class at a local school. You can definitely teach yourself a lot about woodworking, but there’s nothing better than learning from a professional. You’ll pick up important skills much more quickly, and you’ll make a lot of great friends along the way.
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
Make use one of the beveled inner part of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill on a slow speed.
If you are new to woodworking, stick with a cheap and effective tool bag. Many of the tools to start with are under a couple hundred dollars and very easy to find and use for basic projects. These tools include a benchtop tablesaw, a jigsaw or sabre saw, a circular saw, a random orbit sander, a corded or cordless drill, a fixed-base or plunge router, and a pipe and small bar clamps.
There are some basic tools needed for woodworking projects. These include a saw, hammer, files, level, square and measuring tapes. Larger pieces of equipment you may need are different types of electrical powered saws and sanders. The power tools can be quite expensive, and you may not need them unless you do a lot of woodworking projects.
Always disconnect the power of your power tools before you change blades or do any maintenance work on it. It is very dangerous to leave the electrical tool plugged in when you change blades. If the tool turned on, it would be a catastrophe. Always remember this tip to stay safe while woodworking.
Develop good safety habits when beginning your woodworking hobby. It is easy to disregard safety, thinking that it doesn’t really matter if you wear safety glasses, for example. You’ll change your mind the first time you sustain an injury while doing something you enjoy. So start right – think safety!
If you use an orbital sander to smooth the surface of your project before finishing, move the sander very slowly. The recommended speed is one inch per second which is slower than most people sand. Going too fast can cause a small spiral pattern that does not show up until the finish is applied.
Be sure to keep all of your old cans of stain. Stain is expensive, and can come in handy if you wish to use a particular color again. Additionally, stains do not set up like finish does. If there is a skin on top, remove it, and the stain is as good as new.
Make sure that your wood shop has adequate lighting. Bright light is needed when painting, staining or finishing projects. This can also help spot any problems areas, especially when sanding. In addition, extra lighting is going to help you make sure that you apply your stain evenly.
Ask for feedback along the way when you’re making something for other people. If you are creating a jewelry box, for example, make sure that you get a feel for how people are reacting to it before you’re done. That way, the other person is happy and you can be proud of your work.
Use duct tape to easily mark level areas of your floor. If you have a table saw or other large tool on a mobile base, it can be hard to find just the right spot on your floor to keep it level. Once you have found a level location, place tape around the wheels or base of your tool so that you can easily position it the next time it is out.
Some woodworkers look for perfect boards with no knots or blemishes for their projects. Using imperfect boards can add character to the finished piece so long as the defect does not compromise stability. Wood that shows whorls or burls can be used to create beautiful pieces that demand a high price when sold.
Priming is an essential part of any painting project. This is especially true when painting untreated lumber. To help you get the most beautiful results apply two coats of primer to your unfinished wood. Lightly sand between the coats of primer. Then finish your project by applying two or three light coats of oil-based paint for a beautiful finish.
We’ve written this article in order to give you some helpful hints which will make your woodworking projects more successful than ever. As long as you follow them one by one, you are sure to gain benefit from each. When you finish your next project with ease, you’ll be so glad you took the time to read this article.