If you find that you are good with work that involves your hands, consider giving woodworking a try. From measuring to cutting to piecing things together, it is a fun way to spend your time. The tips below will help you get started on the right foot, ensuring your first project is a great one.
Try using duct tape to create a level spot. If you’ve used your table saw on a base that’s mobile, you should be able to easily pull it in and out. To really finish it up, find a level spot on your floor. This also helps you saw boards without obstruction. Mark your wheel positions using duct tape that is brightly colored, and then roll the saw to that same flat spot each time you need to saw.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
Always put your safety first when it comes to using tools, stains and paints. The more variety you use, the more specifics there are about applications, tool use, times for drying, and more. Put your safety first by reading the instructions, wearing any necessary protective gear, and working in areas with good ventilation whenever using oil-based products or anything that produces air pollutants.
Whenever you work with wood, wear a pair of safety glasses and a dust mask to keep yourself safe. When cutting or even hammering into wood, pieces can fly up into your eyes or be breathed in. This can lead to health issues which can end your enjoyment of this pursuit for good.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
Always check blade conditions before you saw. A dull blade will make it terribly difficult to saw. It will also make you make more mistakes that could end up costing you money depending on the wood you’re working with.
Always clean up sanding dust thoroughly before staining or applying a topcoat. If you want a smooth finish, dust is your enemy. Use a vacuum over blowing dust into the air because it settles back onto the wood, and use a damp cloth to ensure all dust is removed from the wood in your final cleanup prior to staining or applying a top coat.
Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.
Learn the basics of sharpening whatever woodworking tools you use personally. Start any work session with cleaning and preventative maintenance. The few moments you put into honing your tools each day will spare you tenfold that time in sanding and repairs. You are also ensuring your personal safety here as well.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Always wear proper eye protection before using any power tools. Wood chips can fly and stab you in the eye resulting in a trip to the emergency room. To protect yourself wear safety glasses that have side shield to help protect your eyes from flying debris produced from using power tools.
Develop good safety habits when beginning your woodworking hobby. It is easy to disregard safety, thinking that it doesn’t really matter if you wear safety glasses, for example. You’ll change your mind the first time you sustain an injury while doing something you enjoy. So start right – think safety!
Make planning something that takes as much time as the doing. Seriously, when you plan things out, you are less likely to make mistakes and your “doing” time will be a lot shorter. Some people find planning to this extent boring, but the simple fact is it can save you money and time overall.
Keep your cords from tangling using inexpensive binder clips that you can pick up at your local office supply store. To use simply wrap your cords around your electrical tools and use a claw style binder clip to snugly and securely keep the cords wrapped around each powered tool.
Hacksaw teeth always face forward. When installing a new blade in a hacksaw, a common mistake is to face the teeth facing backwards, so that the blade cuts as it is pulled. These saws are actually designed to cut when pushed, so always face the teeth forward when mounting them to the handle.
Think about the inevitable contracting and expanding that the wood will endure when you are working on a woodworking project. Keeping this factor in mind can ensure that you make joints that can handle any pressure that may be applied as weather changes, especially if your completed project will be left outdoors.
If you are new to woodworking, there is no harm in starting with kits. For example, when you want to build a new shed, picking up a kit online can get you started. If you want to be more ambitious, you can add features to the kit, such as a window.
If you are good with your hands, woodworking is the activity for you. Take your time to absorb the knowledge you have gained here and you’ll find that entering the world of working with wood becomes easier. In the end, you’ll find success with your projects and a new hobby to enjoy.