You might be one of those people who thought they weren’t good with their hands. However, if you take the time to give it a try, woodworking can show you how magical your hands can be. With just the right tips, outlined below, you’re going to be able to make all kinds of pieces. Keep reading!
Use stop blocks to your advantage for more accurate work. When cutting a lot of pieces the same size, no matter how carefully you measure, you often find small variations. Use a pre-cut stop block to make those measurements pinpoint accurate. Then the table saw will stop at just the right length length.
If you will be re-coating an existing finish, be sure that the surface is clean and free of any wax or oils. Then, let it dry completely, and lightly scuff the surface with a 220-grit sandpaper so that the finish you are applying will have something to hold onto.
If you are trying new skills, make sure that you practice on some wood that has no value, like some scraps. You don’t want to waste an expensive piece of wood before you know exactly what you are doing. Once you have mastered your new skills, you can move to a better piece of wood.
Always be on the lookout for good woodworking tips. If you meet professionals, ask them for their best tips. If you find a magazine chock full with tips, pick it up so that you can keep it in your archive. Even record TV shows that have woodworking in them to glean any tips you my find there.
Know what you need to do to work with the wood and how it reacts to different situations. Each wood has its own characteristics. Staining looks different on various types of wood. Splintering will also be different depending on the type of cuts you use. Learning how different types of woods and different types of grain is important to your woodworking. Each of these things should be considered before starting your next woodworking project.
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
It’s very important to always make sure that the saw blade you use is in great condition every time you use it. Dull blades can make work difficult. On a non-power saw, a dull blade can make exact cuts hard to pull off. This can cost money if the piece is cut too short.
Stumped on a good woodworking project? Take a walk around your home. There are always things around your home that need fixing. Or you may see an area that could use something new that can be created with your skills. Let your house become the inspiration for what you really need.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
Never allow someone to watch while you are woodworking without wearing the same gear that you are wearing. Being anywhere near the tools is a hazard, even if they are not using them. Wood or parts of the tool could fly into the air and strike them just as they could you.
Look to video to learn different woodworking techniques. Seeing woodworking in action is a really powerful way to learn. It is, after all, a very hands on skill you’re picking up. Look to YouTube as a start. There are many videos there going over top skills related to woodworking.
If you do woodworking at home, create a well-lit, organized area in your home or garage to serve as your workshop or hobby area. Keeping your tools and supplies in one place and well-organized keeps you safer, more productive and enjoying the time spent working on your projects. This is important whether you have a large or small workshop, so set up the space with both lighting and organization at the top of your workshop to-do list.
There are some basic tools needed for woodworking projects. These include a saw, hammer, files, level, square and measuring tapes. Larger pieces of equipment you may need are different types of electrical powered saws and sanders. The power tools can be quite expensive, and you may not need them unless you do a lot of woodworking projects.
Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.
Always disconnect the power of your power tools before you change blades or do any maintenance work on it. It is very dangerous to leave the electrical tool plugged in when you change blades. If the tool turned on, it would be a catastrophe. Always remember this tip to stay safe while woodworking.
You may think that you can’t be an expert at woodworking, but if you stay interested and learn as much as you can, your expert status is all but guaranteed. Just take it slowly and use everything you have learned here to make great-looking wood pieces that you can show off to everyone. Good luck!