Working with wood can be a great way to pass the time. Not only can you create woodworking pieces to show others, but woodworking can be a truly relaxing, calm experience. From designing the piece to sanding the final product, it can be something that you enjoy. Here are some tip to make you a better woodworker.
Use hot glue instead of clamps for little things. When cutting, filing, sanding, or finishing something small, use the hot glue gun to glue the piece to your pedestal stick. The glue holds holds just like clamps, if not better than clamps. It also works great for things that clamps will not work on. When you finish your project, loosen it gently with a putty knife.
Before practicing advanced woodworking techniques, make sure you’ve got the basics down. Typically those advanced techniques rely on you knowing the basics like the back of your hand. If you don’t, you’ll more than likely find learning to be a very frustrating experience. So start slow, and work up from there.
Never skip sanding when it is necessary or think that staining hides imperfections in the wood. Wood with scratches, dents and nicks absorbs much more finish or stain than wood that is smooth. When you skip sanding or do not do a thorough job of it, the imperfections stand out even more because of the increased absorption.
Learn about using pilot holes. This is pretty simple to do. When driving a screw or hammering a nail into a little piece of wood or getting pretty close to the edge of a piece, it tends to split. Sometimes it’s unavoidable to put a fixing into a place like this. However, drilling a hole through the joint that’s a bit smaller than the fixing can prevent it from splitting.
Keep your tools and hardware organized. When you keep clutter to a minimum, it does more than just add discipline to your workshop. It also keeps distractions, hazards and time spent hunting down a misplaced item to a minimum. Keeping screws, nails and other hardware and accessories in one place neatly stored until needed makes your projects faster and keeps you safer.
If you have young children around, make sure that they know the ground rules about your woodworking area. They should never be in your work area without close supervision. Also, they should never sneak up on you from behind. When you are startled, you may injure yourself with a tool.
Quickly get rid of burn marks caused by the router. Certain woods burn easily when routered and it can be very time-consuming trying to sand the marks away. If the router template is complex, it may be nearly impossible. Try just routering down further just a small amount using the same bit. About 1/32nd of an inch should take the burn marks off.
Carefully consider the skills necessary to complete a project before beginning. This is especially important for novice woodworkers. Many people think that building a dresser shouldn’t be that difficult; however, they soon realize that they do not have the necessary skills to complete the project and give up before they even begin.
Choose your woodworking tools and equipment carefully if you live in a small space such as an apartment. You can still enjoy completing woodworking projects, but might have to forgo the 14-inch band saw. Pick tools that will do what you need but don’t take up too much space.
Assemble your tools and make sure they work before you want to start your wood piece. There is nothing more irritating than getting ready to work and realizing that your saw is dull or that the band on your goggles is broken. Before you plan to start, make sure that you’ve remembered to buy the right supplies, and that you’ve checked all your tools.
Make sure that your woodworking area has lots of light. You need plenty of light when you paint, sand or stain a particular project. You need to see the fine details to make your final pieces look good. Additionally, extra lighting will help ensure that your stain is applied evenly.
Make sure that your work area is always clean and organized. It is easiest to work when you know where everything and you do not have to work around a mess. To keep your area nice at all times you should put things away as you work and discard waste as it is produced.
Double-check your measurements. If you’re working on something where separate pieces are different sizes, make sure that your measurements are accurate so that everything fits together well. You can always fix any problems, but measuring properly can help you avoid those problems. Check your measurements on two separate occasions to make sure you have it right.
Use hot glue instead of a clamp on small projects. If you have to cut, shape, or file a small object, try using a hot glue gun to attach it to a pedestal. It will hold better than a clamp, and can be used on projects that are too oddly shaped or small to be clamped in the first place. To remove it, simply pry lightly with a putty knife.
Know the wood that you are working with very well before you begin your next woodworking project. You want to know the direction of the grain, the durability of the wood as well as how it will be affected by weather conditions and the tools that you plan to use. Knowing these things will help to have the results that you desire.
If you are new to woodworking, there is no harm in starting with kits. For example, when you want to build a new shed, picking up a kit online can get you started. If you want to be more ambitious, you can add features to the kit, such as a window.
Woodworking can be one of the most rewarding hobbies out there. When you see the finished piece you’ve made, it can give you a real sense of satisfaction that you can share with your loved ones. The suggestions in this article can really help you to do a great job.