Woodworking is a craft like no other.
You get to work with one of nature’s most useful resources and make something with your mind and hands. Whether you do this personally as a hobby, professionally for money or are just reading about it as a future possibility, this article has tips you can use to be a better woodcrafter.
Take Your Time
Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.
Dust can ruin the finish of any woodworking project
Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.
A necessary tool for woodworking is the common pencil.
encils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.
If there is a joint in your work that does not fit together properly, this cannot be fixed with glue. While
it may seem like the simple way to fix things, it will only work temporarily. The best thing to do would be to start over and be more careful the next time.
Measure Twice Cut Once
Always remember the rule of measuring twice and cutting once. You are human, which means that mistakes are inevitable. However, you can prevent measurement mistakes from turning into cutting mistakes when you measure two or three times. That is going to spare you serious waste, not just in terms of wasted wood, but also money and time.
Start Collecting Tools
When you are new at woodworking and starting to collect your tools, purchase simple tools to begin with. Try your hand at a few projects to make sure you want to continue before you invest in expensive tools. You can save money and get better quality tools when you buy used tools.
Use a socket when drawing an arc.
Most shop owners have a variety of sockets that can be used for a variety of radii. For example, if you are wanting a radius of 10 millimeters, reach into your toolbox and grab a metric socket that size. You will get a perfect arc each time using this technique.
Difficult to Reach Screws
Have you ever had trouble reaching certain screws using just you hand the the screwdriver? Your toolbox has the answer. Just grab a 12-point socket set. Fit the socket to your screwdriver; then, attach it to a ratchet.
Do you find that your joint compound seems to dry out in between uses? There is a simple fix to help keep your joint compound moist. Simply pour a small amount of water on top of your joint compound before sealing it. The next time you need to use the joint compound, drain off the excess water and your joint compound will be perfectly moist.
Only cut using sharp tools
Older and dull tools result in tear-outs and even chipping, which is frustrating and a waste of time. Sharp tools means you get clean cuts quickly. You’ll also spend a lot less time sanding things to get just the right look and fit that you need.
Wookworking Safety First
The most important part of any woodworking project is safety. There are many sharp tools that need to be used and you should be very careful when using them. Find out the proper way to use these tools. If they are power tools, read the manual. If they are hand tools, have a professional show you how to use them properly.
Make accurate lines and measurements by using a drafting square instead of a drywall square, yardstick or ruler. Drafting squares are smaller and easier to manage and are much more accurate than any of these tools. This is a handy tool to keep at your side because it is smaller. Additionally, drafting squares are very affordable, selling for about five bucks at any art supply store.
Woodworkers Glue
You can use woodworkers glue to secure joints if you clamp the joint securely in place while the glue dries. Many people prefer to glue the joint in addition to using fasteners. This prevents the joint from loosening if it is subjected to pressure that could cause it to give way.
Create Your Woodworking Workspace First
Before beginning your woodworking project, create a space to work. Be it the garage, attic, or extra room, your space needs to have enough space to house your tools and supplies. Keeping all of your woodworking tools and materials in the same place allows you to work with a minimum of interruptions.
When starting out in woodworking, buy the tools you’ll need immediately. Later buy more tools as the need comes up. Don’t spend a fortune decking out a shop at first. You’ll find there are many tools you won’t ever use. You’ll also find you can often make due with the tools you already have on hand rather than spending more money.
Tape Your Wood Before Staining
If you don’t want glue to stain the piece of wood you’re working on, it’s a good idea to use tape first. Clamp together the two pieces you want to glue, and then put tape on the joints. Then use a sharp knife to cut the piecs apart. That way, when you glue together your wood, excess glue will get on tape and not the wood.
The craft of woodworking is unlike most others.
It is a medium where humans take a strong natural resource and work in ways that leaves anything from pieces of art to buildings. Whatever your personal level of involvement in woodworking is, this article had tips and tricks in it you can surely use.